Help - Trying to restore from USB2 drive back to local drive
 

Right.. small issue.

I ran superduper (2.5) to clone my macbook's local hard drive to a USB2 drive, as I normally do for a backup.

I then powered down my macbook, took out the local hard drive, and inserted a shiny new bigger one.

I then powered up the macbook, and it booted happily off the USB2 drive, as expected... this is where I am now.

However, after using disk utility to partition etc the new local drive, if I try and use superduper to copy all the data back to the new local drive, I get the following log output:

| 09:50:09 PM | Info | SuperDuper!, 2.5 (84), path: /Applications/SuperDuper!.app, Mac OS 10.5.2 build 9C7010 (i386)
| 09:50:09 PM | Info | Started on Fri, May 23, 2008 at 9:50 PM
| 09:50:09 PM | Info | Source Volume: SimonBackup, mount: /, device: /dev/disk1s1, media: Maxtor 3200, interconnect: External USB, file system: "Journaled HFS+", OS: 10.5.2 (9C7010), capacity: 120.00 GB, used: 103.15 GB, directories: 177558, files: 893850, ejectable: NO, ACLs: Enabled
| 09:50:09 PM | Info | Target Volume: NewDisk, mount: /Volumes/NewDisk, device: /dev/disk0s2, media: ST9200420AS, interconnect: Internal SATA, file system: "Journaled HFS+", OS: N/A, capacity: 150.00 GB, used: 0.09 GB, directories: 9, files: 44, ejectable: NO, ACLs: Enabled
| 09:50:09 PM | Info | Copy Mode : Erase, then copy files
| 09:50:09 PM | Info | Copy Script : Backup - all files.dset
| 09:50:09 PM | Info | Transcript : BuildTranscript.plist
| 09:50:09 PM | Info | PHASE: 1. Prepare to Copy Files
| 09:50:09 PM | Info | ...ACTION: Preparing SimonBackup
| 09:50:09 PM | Info | ......COMMAND => Verifying the integrity of volinfo.database
| 09:50:09 PM | Info | Repaired volinfo.database
| 09:50:10 PM | Info | ......COMMAND => Enabling permissions on SimonBackup
| 09:50:10 PM | Error | sh: /usr/bin/grep: Permission denied

Not so good...

Anyone have a fix for this? It would be nice to get this data copied back, and the laptop running off the (new) local disk :)

See my reply to your emailed support request.