#1
|
|||
|
|||
Backing up a PowerBook G4 to a Mac Pro
Using Super Duper I backed up my PowerPC based PowerBook G4 to an extra hard drive on my Intel Mac Pro.
After putting in a new hard drive in the PowerBook G4 I restored the files to the new hard drive. Now when I start the PowerBook G4 I receive an alternating ? and a Mac logo within a folder. I still have the original hard drive. What can I do to get the back-up working properly on the PowerBook G4? Thank you for looking. |
#2
|
||||
|
||||
It sounds like the new drive isn't properly partitioned. You need to partition it as "Apple Partition Map" using the "Options" button in the Partition tab of Disk Utility...
__________________
--Dave Nanian |
#3
|
|||
|
|||
Thank you dnanian. I partitioned the drive and now I am copying the information to the new hard drive. I will let you know how it goes.
|
#4
|
|||
|
|||
Hmnn. I get the same logo after I partitioned the drive.
Does the name of the volume need to be the same on the new one as it was on the old hard drive? |
#5
|
||||
|
||||
No, though that's best. You used "Backup - all files" and set the new drive as the startup volume?
__________________
--Dave Nanian |
#6
|
|||
|
|||
Dave, thanks again for your help.
I did choose the option"Backup - all files". I then placed them on one of my hard drives on my Mac Pro. I then put my new hard drive in the notebook. I re-opened SuperDuper! and then choose to copy the back-up I did to the new hard drive. How do you choose the new drive as the startup volume? Last edited by shirtuser1989; 05-12-2008 at 02:00 PM. |
#7
|
||||
|
||||
Use the Startup Disk preference pane to do it... or, choose the option in SuperDuper! to restart from the destination drive.
__________________
--Dave Nanian |
#8
|
|||
|
|||
Thanks dnanian.
I choose to copy the files from my backup to my new hard drive on the notebook. I also choose to restart the computer using the new hard drive on completion. I'll let you know what happens. |
#9
|
|||
|
|||
Same result.
Let me clarify what I've done. I connected a Firewire cable between my PowerBook G4 and my Mac Pro. I turning the notebook while pressing the letter T. This gave me access to Firewire Transport Mode. I opened up Super Duper! on my Mac Pro and choose to "Backup-up all files" to a hard drive on the Mac Pro. The copy was successful. I replaced the hard drive on the notebook. I then booted the notebook with the new hard drive while pressing T. This enabled my Mac Pro to see the notebook. I then opened Super Duper! and then told it to copy the contents of the hard drive that contained my back-up of the old hard drive to the new one. It completes w/o any issues and when in Transport Mode I see the same exact files that existed on the back-up. The problem is that I still receive the flashing ? and mac logo when I start the notebook with the new hard drive. What am I missing? Thanks for you help! |
#10
|
||||
|
||||
Ah, you're doing this from an entirely different computer. If you hold down Option when you power on the Powerbook, do you get the new drive as a startup choice?
__________________
--Dave Nanian |
#11
|
|||
|
|||
I get to icons. One appears to look like a reload icon and the other is an arrow that point to the right. I click on the reload icon and I receive a spinning wheel for a few moments then nothing. When I click on the arrow nothing happens.
Urgh.. |
#12
|
||||
|
||||
And you're sure the G4 is properly partitioned as "Apple Partition Map"?
__________________
--Dave Nanian |
#13
|
|||
|
|||
Thanks Dave. I will double check it tomorrow morning and then let you know.
|
#14
|
|||
|
|||
Dave, o the shame. It was not partitioned as Apple Partition Map. I am currently copying the information over. It will update this post in the morning. I'm sure that was the issue.
Thank you for your patience and experience. |
#15
|
||||
|
||||
Glad you were able to discover the cause!
__________________
--Dave Nanian |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PowerBook Cannot Boot a MacBookPro backup | OneMatchFire | General | 1 | 07-22-2007 05:59 PM |
procedure for back up/restore- sending Powerbook to Apple for repair | SupaFuzz | General | 8 | 01-05-2007 07:50 AM |
Clone PowerBook to Mini? | PhilipTobias | General | 11 | 02-05-2006 10:36 AM |
Question regarding backing up to Image | giba | General | 3 | 05-20-2005 05:54 PM |
Cloning iMac to Powerbook | GoOnSafari | General | 3 | 05-06-2005 09:40 PM |