Shirt Pocket Discussions  
    Home netTunes launchTunes SuperDuper! Buy Now Support Discussions About Shirt Pocket    

Go Back   Shirt Pocket Discussions > SuperDuper! > General

Thread Tools Rate Thread Display Modes
Old 10-10-2008, 06:18 PM
gianfry gianfry is offline
Registered User
Join Date: Oct 2008
Posts: 7
Big dilemma: data protection with Knox (sparseimages) / back up with SuperDuper!

Hi there, I finally decided it's time to join the club. It's about time I set a "Data Protection" and "Backup" Plan. (on Mac, of course).

When I have to make a choice, I go and just get obsessed with information gathering and knowledge: I need to figure things out, and I don't stop until I am pleased with solutions.

So I spent this week (literally) on reading all about the topics I need to figure out.

Again, what I need to cover, I call it : "Mac Data Protection and Backup Management".

So, two different yet complementary topics:
1) I want to "password-protect" ALL of my data, be it on my computer and hard drives. Yeah, that's important, right?

2) I want to have perfect duplicate data (backup) of my computer, hard drives, and remote server on a "Backup Hard Drive". And of course I want to protect that drive too.

So I went out there, and I start reading about it all and a few names came up:
- FileVault
- Time Machine
- DiskUtility
- Knox
- SuperDuper!
(And a few others along the way…)

I understood things about all of that (again, it was about time).

To make a long story short (too late for that?), from my research I got that:

• In the matter of "Data Protection": the way to protect files (or whole volumes) is all related to "Vaults" (encrypted password protected "vistual disks"). That there are 2 kinds of "Vaults", "Disk Images" (.dmg) and "Sparse Images" (.sparseimages). (Yeah, I know, Sparse Bundles…). Got the difference between the two (three).
Now, I discarded use/turn on FIleVault because of the fact that it can only make the "whole Home Folder" as one single "Vault", and can't make different "Vaults" for different files.
Then found out that "DiskUtility" can produce just that.
But in my research I came across this third software that is Knox, and I got that it could handle the whole vault-thing preatty nice and simple. (But yes, I discoverd all the things that DiskUtility is able to do, let there be light…).
So, for "Data Protection", I decide to go with Knox. All right…

• In the matter of "Backup Management": to sum it
up it all came down to Time Machine and SuperDuper!, really. Somehow I don't find Time Machine suitable for what I need, and I want to keep it as simple as possible. One software for Data Encryption, another for Buckup. That's it.
I digged on SuperDuper!, and the fact that it makes a perfect "bootable" copy of your whole Mac, system, applications and files, is unbeatable. Plus it is very simple to use. I studied the manual, read thousand of posts on forums and all.

Now, I wanto to create a framework for my protected backup.

First thing, I went and bought an external hard drive: LaCie 1TB.

For you to know, I got a Mac and two external hard drives and I want to back up all this data to a "Backup Disk".

So, my configuration will look like this:

- Mac HD (my computer: 10.5.2 160GB)
- HD-01 (external hard drive: LaCie 160GB). For: iTunes files
- HD-02 (external hard drive: LaCie 250BG). For: all kinds of stuff.

- Remote-HD (files on MediaTemple server). For my sites in WordPress.

- Backup-HD-01 (LaCie 1TB). For:
copy of "Mac HD" + "HD-0"1 +" HD-02" + "Remote-HD".

So, stripped out:

- Mac HD
- HD-01
- HD-02
- Remote-HD

- Backup-HD-01

Now, I want to make sure that all those hard drives are formatted as "Mac OS Extended (Journaled)", right? Right.

The problem I am running into (finally, he got there…) is that I need to find the right interaction between Knox Vaults options, and SuperDuper! backup options.

The thing is that Knox gives you 2 possible choices for making a password protected sparse image:

1) Encrypted files vaults
2) Encryted volume (whole-disk) vault

The difference is that, using option number 2, when you mount (connect) your "External Hard Drive", you need to type your password to mount the whole disk.

In option number 1, when you mount your "External Hard Drive", it just normally mounts it, and then you can access and interact with the different "Encrypted files vaults" within it.

From Knox interface, when you want to make a new vault:
Vault Type:
• Create an encrypted vault file
• Reformat a volume as an encrypted vault

To know if I want to format my "Backup-HD-01" using "Reformat a volume as an encrypted vault", I need to know how SuperDuper!'s bootable copy will react.

Question is: can "SuperDuper! bootable copy" reboot if the hard drive is formatted as an "encrypted volume"? And if it can't, can it reboot if it is just in a "sparse image", or it totally need to be copied on the hard drive, outside of the sparse image, in order to reboot? Which is the case when you are forced to use OS X Install Disc, even thought you got a rebootable copy on an Hard Drive?

So, I'd like to figure out this:

1) If the "Bootable Backup Copy" of my "Mac HD" is on an "External Hard Drive" that I format as an "Encryted volume (whole-disk) vault", can it "boot" from it, without running the "OS X Install CD"?

2) If the "Bootable Backup Copy" of my "Mac HD" is on an "External Hard Drive" that I format as an "Encryted volume (whole-disk) vault", can one "boot" from it, without running the OS X install CD?

So, the answer can be:

a) Yes you can with option 1, you can't with option 2

b) Yes you can with option 2, you can't with option 1

c) Yes you can with option 1 and 2

d) No, you can't with neather options, and will have to run the "OS X Install CD".

e) You can go with option 1 and leave a partition in the hard drive to copy the bootable copy on, so that it can work from there, without using the OS X Install CD.

Also, is it possible to just copy the "System" (bootable) on a place, excluding confidential information, and make sparse images for ther rest of the files. How do you do that?
Cause it's what the guys from Knox suggest here.

Really, I don't seem to figure it out, even if I read about everthing around.

I know I made it really long, and that I could really just write: "Can SuperDuper! bootable copy reboot from an encrypted volume or/and from an encypted sparse image?"

But, well, I am sick in bed, so I got time to make it long (and probably boring).

Once I figured ther whole thing out, I will surely go and write the clearest article about Mac backup and data protection ever written. And you will find it here. (At the moment of this writing, the site is not even up yet, but it will.)

Anyway, thanks for not killing yourself after such a long post.

PS: dnanian?
Reply With Quote
Old 10-10-2008, 07:07 PM
dnanian's Avatar
dnanian dnanian is offline
Join Date: Apr 2001
Location: Weston, MA
Posts: 14,923
Send a message via AIM to dnanian
This isn't something we've tested, but in general terms you can't back up an image that you have open (e.g. FileVault). I don't know anything about Knox's "whole disk vault", but I don't think he allows encryption of the boot volume.

PGP does have a "whole disk encryption" option, and the next version of SuperDuper! (v2.6) will support it... and that should be bootable, too.
--Dave Nanian
Reply With Quote
Old 10-11-2008, 04:58 AM
gianfry gianfry is offline
Registered User
Join Date: Oct 2008
Posts: 7
Hi dnanian, thanks a lot for your answear.

In short, I would like to know if I go and choose "Backup - all files" from SuperDuper! and as a destination HD I choose a disk that I encrypted as a "whole volume" (means before mounting it asks for a password), will my copy of my Mac be bootable from that disk.

Other option I want to make sure is: if instead I go and choose "Backup - all files" from SuperDuper! and all my files are in in a sparse image, when I need to boot from the Backup Disk, can I just open the sparse image and then boot from there, or because of the fact that my system and all the files are in a sparse image, make the copy not bootable.

Thanks for the support.
Reply With Quote
Old 10-11-2008, 05:28 AM
gianfry gianfry is offline
Registered User
Join Date: Oct 2008
Posts: 7
More specifically…

From the manual, page 16:

"With a Sparse Image, your files are kept in a “virtual” disk, which is actually stored in a single file. This file can be placed anywhere, including on a network volume. When mounted (which you do by simply opening the
Sparse Image file), the “virtual” drive looks just like a local disk, and can be
backed up to like any other. You can even Smart Update it!

There are some disadvantages, though:

• …
• …
• Finally, since they’re not physical drives, images of any type cannot be
used to start up your Macintosh. However, the contents retain their
bootable properties and – once restored to a real drive – can act as a
startup drive."

- -

Now, my understanding from that, is that whenever the "Copied HD" is on a sparse image, you can't just reboot once the image is mounted. Is that right?

If so, can you just mount the image and simply copy the "Copied HD" in it to the drive itself (assuming you got enough space for it), so that you can boot from there. (You end up with two exact copied stuff on the same HD, but at the least you can reboot, should it be necessary).

That would mean that you can't possibly have a "password protected" copy of your Mac which is bootable.

Mmm, or am I missing something?

Last edited by gianfry; 10-11-2008 at 05:38 AM.
Reply With Quote
Old 10-11-2008, 07:52 AM
dnanian's Avatar
dnanian dnanian is offline
Join Date: Apr 2001
Location: Weston, MA
Posts: 14,923
Send a message via AIM to dnanian
Sparse images aren't real drives, and cannot be used as startup drives. PGP does this differently, and would be bootable and encrypted.
--Dave Nanian
Reply With Quote
Old 10-11-2008, 08:44 AM
gianfry gianfry is offline
Registered User
Join Date: Oct 2008
Posts: 7
Mmm… What's PGP?
(Is that a dumb question?)
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SuperDuper! erased my data during smart update avex General 7 10-29-2008 10:13 AM
A SuperDuper Back Up Strategy Bagelturf General 3 09-09-2007 01:23 PM
TESTING: SuperDuper problems copying some data stevea General 17 05-16-2005 06:18 PM
Security of SuperDuper Backup Data? Zeigh General 1 08-08-2004 12:29 PM
Another review: MaMUGs looks at SuperDuper! dnanian General 0 01-26-2004 09:26 AM

All times are GMT -4. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.